Chapter 2 Avaya C460 CLI Commands

set device-mode (Layer 3)

User level: read-write, admin.

Use the set device-modecommand to change the basic mode of operation of the C460 switch between Router and Layer 2 modes.

The syntax for this command is:

set device-mode <mode>

mode

Router Layer2

Example:

Router-1>set device-mode Layer2 This command will RESET the device

*** Reset *** - do you want to continue (Y/N)? y

set dot1x max-req

User level: supervisor

Use the set dot1x max-reqcommand to set maximum number of times the port tries to retransmit requests to the Authenticated Station before the session is terminated.

The syntax for this command is:

set dot1x max-req <count>

count

Number of attempts (1 to 10)

Example:

C460-1(super)#set dot1x max-req 3

set dot1x quiet-period

User level: supervisor

Use the set dot1x quiet-periodcommand to set the minimal time between authentication attempts.

The syntax for this command is:

set dot1x quiet-period <Seconds>

Seconds

Number of seconds – 0 to 65535

84

Avaya C460 Reference Guide

Page 96
Image 96
Avaya manual Set dot1x max-req count, C460-1super#set dot1x max-req, Set dot1x quiet-period Seconds