Avaya manual C460-1#set port edge admin state 3/1 edge-port, Set port enable

Chapter 2 Avaya C460 CLI Commands

The syntax for this command is:

set port edge admin state <module/port> <admin state>

module	Number of the module (3-6).
port	Number of the port on the module. If you do not specify a number,
	all the the admin state for all ports on the module is set.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
admin	You can set the port admin state to:
state	•	edge-port
	•	non-edge-port.

Examples:

C460-1#set port edge admin state 3/1 edge-port

port 3/1 edge admin state is set to edge-port

C460-1#set port edge admin state 3/1 non-edge-port

port 3/1 edge admin state is set to non-edge-port

set port enable

User level: read-write, admin.

Use the set port enable command to enable a port or a range of ports.

The syntax for this command is:

set port enable [module/port]

module	Number of the module (3-6).
port	Number of the port on the module. If you do not specify a
	number, all the ports on the module are enabled.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.

Avaya C460 Reference Guide 107