Avaya manual Set vlan Layer, C460-1configure#set vlan 2 name vlan2, Set web aux-files-url

Chapter 2 Avaya C460 CLI Commands

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

set vlan (Layer 3)

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode.

Use the set vlan command to create a router Layer 2 interface.

The syntax for this command is:

set vlan <vlan-id> name <vlan-name>

vlan-id	Interface Index
vlan-name	Interface name (used in layer 3 protocols)

Example:

C460-1(configure)#set vlan 2 name vlan2

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

set web aux-files-url

User level: read-write, admin.

Use the set web aux-files-urlcommand to allow the Device Manager to automatically locate the URL of the Web server containing the Device Manager help files and Java plug-in.

Tip: Ensure that the Web server is always accessible to prevent potential delays to Web access to the device.

The syntax for this command is:

set web aux-files-url<//IP address/directory name>

Avaya C460 Reference Guide 139