Avaya C460 manual Show ip reverse-arp, Router-1sh ip reverse-arp 0010a49897e0, Show ip route

Chapter 2 Avaya C460 CLI Commands

show ip reverse-arp

User level: read-only, read-write, admin.

Use the show ip reverse-arp command to display the IP address of a host, based on a known MAC address.

The syntax for this command is:

show ip reverse-arp<mac addr> [<match len>]

mac addr	MAC address
match len	The number of bytes in the address to match
Example:

Router-1>sh ip reverse-arp 00:10:a4:98:97:e0

Showing	1 rows
Address		MAC Address	I/F	Type	TTL
---------------		----------------- ----------- -------			--------
149.49.70.68		00:10:a4:98:97:e0	e-70	Dynamic	14355

show ip route

User level: read-only, read-write, admin.

Use the show ip route command to display IP routing table entries.

The syntax for this command is: show ip route

Example:

C460-1>show ip route

Network	Mask	Next-Hop	Interface	Source
----------------	----------------	----------------	-----------	------
-
149.49.50.0	255.255.255.0	149.49.50.233	inband	LOCAL
0.0.0.0	0.0.0.0	149.49.50.1	inband	STATIC

show ip route (Layer 3)

User level: read-only, read-write, admin.

Use the show ip route command to display information about the IP unicast

Avaya C460 Reference Guide 163