Chapter 2 Avaya C460 CLI Commands

erase startup-config

User level: read-write, admin.

Use the erase startup-configcommand to clear the startup configuration.

The syntax for this command is:

erase startup-config

Example:

C460-1#erase startup-config

fragment chain

Use the fragment chain command to set the maximum number of fragments that can comprise a single IP packet destined to the router.

Use the no fragment chain command to set the fragment chain to the default value (64).

The router does not perform reassembly of packets in transit.

The syntax for this command is:

[no] fragment chain <chain-limit>

chain-limit

The maximum number of fragments that can comprise a single IP

 

packet, from 2 to 2048. The default is 64.

Example:

C460-1#fragment chain 10

fragment size

Use the fragment size command to set the maximum number of fragmented IP packets, destined to the router, to reassemble at any given time. Use the no form of this command to set the fragment size to the default value (100).

The router does not perform reassembly of packets in transit.

The syntax for this command is:

[no] fragment size <database-limit>

database-limit

The maximum number of packets undergoing re-assembly at

 

any given time, from 0 to 200. The default is 100.

Avaya C460 Reference Guide

33

Page 45
Image 45
Avaya manual Erase startup-config, C460-1#erase startup-config, C460-1#fragment chain, No fragment size database-limit