Chapter 2 Avaya C460 CLI Commands
default VLAN.
The syntax for this command is:
[no] ip vlan <vlan-id>
Example:
To specify VLAN developmental as the VLAN used by interface “products”:
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
ip vrrp
User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if necessary.
Use the ip vrrp command to create a virtual router on the interface.
Use the no ip vrrp command to delete a virtual router.
The syntax for this command is:
[no] ip vrrp <vr-id>
Virtual Router ID |
Example:
Done!
ip vrrp address
User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if necessary.
Use the ip vrrp address command to assign an IP address to the virtual router.
Use the no ip vrrp address command to remove an IP address from a virtual router.
62 | Avaya C460 Reference Guide |
