Chapter 2 Avaya C460 CLI Commands
vlan | VLAN NAME (string up to 16 chars) or VLAN ID (number) |
The IP address of the station(s) | |
The ip mask of the routes. | |
static | Display static ip ARP information. |
Example:
show ip arp | Display all ARP mapping |
show ip arp marketing | Display interface ARP mapping |
show ip arp 192.168.49.1 | Display one host ARP mapping |
show ip arp 192.168.49.1 255.255.255.0 Display range of ARP mapping
show | ip | arp | marketing_vlan | Display | vlan ARP mapping |
show | ip | arp | static | Display | static ARP mapping |
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
show ip icmp
User level:
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
Router-1> show ip icmp
ICMP error messages status is ENABLE
158 | Avaya C460 Reference Guide |
