Avaya C460 manual Show ip ospf neighbor, Router-1show ip ospf neighbor, Show ip protocols

Chapter 2 Avaya C460 CLI Commands

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

show ip ospf neighbor

User level: read-only, read-write, admin.

Displays OSPF-neighbor information on a per-interface basis.

The syntax for this command is: show ip ospf neighbor

[<interface-name>] [<neighbor-id>]

interface-name	The OSPF interface name.
neighbor-id	Neighbor ID.

Example:

Router-1>show ip ospf neighbor

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

show ip protocols

The syntax for this command is:

show ip protocols [<protocol>]

protocol	RIP OSPF.
(Optional)

Example:

Router-1 (super) # show ip protocols Routing Protocol is "rip"

Sending updates every 30 seconds, next due in 0 seconds Invalid after 180 seconds, flushd after 300 Redistributing: rip

Default version control: rip version 1

Interface		Version Key
Routing	for Networks:
Routing	Information Sources:
Gateway		Last Update

162 Avaya C460 Reference Guide