Chapter 2 Avaya C460 CLI Commands
set license
User level: read-write, admin.
Use the set license command to activate a licensed feature on a specific C460 chassis.
For a full description of the Feature License and the installation procedure please refer to the Installation Guide provided with the Feature License.
The syntax for this command is:
set license [license] [featureName]
license | The license number |
featureName | The name of the feature, currently either smon or routing. |
| The default feature is smon. |
Example: |
|
C460-1# set license 026 9b8 216 908 dea f4d layer-3
set logout
User level: read-write, admin.
Use the set logout command to set the time in minutes until the system automatically disconnects an idle session.
The syntax for this command is:
set logout [timeout in minutes]
timeout in | Time until the system automatically disconnects an idle | |
minutes | session. | |
| • | Setting the value to 0 disables the automatic disconnection |
|
| of idle sessions |
| • | The default value is 15 minutes. |
94 | Avaya C460 Reference Guide |
