Black Box 5250 manual Remote Emulator Card, 9.2.2ERROR MESSAGES ON LOADING EMULATION SOFTWARE

5250 REMOTE EMULATOR CARD

Error Creating File: DOS is unable to create a file in the current disk and directory. This is usually because the current disk is unavailable or write- protected.

Error Deleting File: DOS detects an error while attempting to delete a configuration file. This is usually because the current disk is unavailable or write-protected.

Error Reading File: The disk file is the wrong size or the data is invalid. If this error occurs while a user-created file is being read, the file must be recreated; otherwise, you should reinstall the configuration software.

Error Writing File: DOS detects an error while trying to write data to the current disk. The current disk might be unavailable, write-protected, or full. If you can correct the problem, do so, then press Y and DOS will retry the write; otherwise, press N to abort the write.

File Already Exists: The indicated file name already exists.

File Could Not Be Found: DOS can’t find the indicated file name. Verify that the current disk and directory are correct. If so, create a new configuration file.

File Open Error: DOS detects an error while trying to open the requested file. Verify that the current disk and directory are correct; if so, you should reinstall the configuration software.

Invalid Configuration File: The configuration file you are trying to modify is invalid. Verify that you are specifying the correct file. If so, you’ll have to delete and recreate the file.

Session is Not a Display Session: The logical session specified for the file transfer has not been configured or is configured as a printer.

9.2.2ERROR MESSAGES ON LOADING EMULATION SOFTWARE

Configuration File is Invalid: The specified configuration file contains incorrect data. Verify that you are using the correct file. If so, you’ll have to delete and recreate the configuration file.

Configuration File Not Found: The specified configuration file cannot be located. Verify that the current disk and directory are correct and that the correct configuration file is specified.

88