5250 REMOTE EMULATOR CARD
4.Hardware Installation
4.1System Requirements
4.1.1PC REQUIREMENTS
You must have these PC resources to use the 5250 Remote Emulator Card:
•IBM PC, PC/XT™, AT®, 386, 486, or compatible personal computer that does not use the Micro Channel® Architecture
•
•DOS version 3.3 or higher
•225K of RAM + 11K per display session + 29K per printer session
4.1.2HOST REQUIREMENTS
You must have these host resources to use the 5250 Remote Emulator Card:
•IBM System/34, /36, /38, or AS/400
•Synchronous communications port that supports the SDLC protocol
4.2 The Complete Package
When you receive your Card, check the package it came in for water- or shipping damage; contact the carrier if you find any. The package should contain the following:
•(1) 5250 Remote Emulator Card
•(1) 3.5" software diskette
•(1) copy of this manual
Keep the original packaging in case the Card must be reshipped. If your system requires 5 1⁄4" diskettes, please contact your supplier.
18
