
5250 REMOTE EMULATOR CARD
8.2.2WORD PROCESSING
When the system operator configures the printer on the host, a default font ID is configured for the printer, which should be the most commonly used font. The WP program may also have a default font ID. Since the default font ID can vary depending on the system setup, ask your system operator if you have questions about the default font ID.
To change the font, either use the
The 5250 Remote Emulator Card allows bolding, underlining, and super/subscripting by recognizing the host commands for these features in both WP and DP applications. The 5250 Remote Emulator Card uses a shadow print for bolding, even on small and italic fonts.
8.2.3PAGE LENGTH
The printer prints up to 66 lines at 6 LPI in HP mode (the line spacing may be compressed slightly to fit), or 64 lines at 6 LPI in IBM PPDS mode, on each page of 8.5" x 11"
The printer prints up to 72 lines at 6 LPI in HP mode (the line spacing may be slightly compressed to fit) or 70 lines at 6 LPI in IBM PPDS mode on each page of 8.27" x 11.69" A4 size paper.
8.2.4PAPER SIZE
Configure the printer setup on Card for the paper size used most. The Card only recognizes these paper sizes:
Letter Paper: 8.5" x 11" (216 x 280 mm)
Legal Paper: 8.5" x 14" (216 x 356 mm)
A4 Paper: | 8.27" x 11.69" (210 x 297 mm) |
If you choose any other paper dimensions in the
8.2.5BIN SELECTION
The 5250 Remote Emulator Card selects paper from bin 2 only if the optional paper tray is installed in the printer. If bin 2 or 3 is chosen in a host document, the printer will print from bin 1 unless the optional paper tray is installed.
66