Black Box 5250 manual Remote Emulator Card, 6.The SDLC Parameters Menu

5250 REMOTE EMULATOR CARD

6.2.4SDLC PARAMETERS

SDLC parameters are for matching the host’s line and controller settings. The system administrator should verify that the settings you choose match the host configuration. At the Configuration Menu, move the cursor to SDLC Parameters and press [ENTER]. The SDLC Parameters Menu appears, as shown below in Figure 6-6.

Modify / Create /Delete / Exit	File Name = EM5251R
________________________________
SDLC Parameters	Values
Controller Type	5394
Station Address	0F
NRZ/NRZI Encoding	NRZI
DMA Channel 1	Enable
DMA Channel 3	Enable
IRQ Interrupts	IRQ10
Base I/O Address	340-34F
Baud Rate	9600

Select type 5251-12, 5294, or 5394

Menu Command Options:

Use ↑ ↓ to select parameters ← → to modify values Change Option ↵ Select Options <ESC> Previous Screen

Figure 6-6. The SDLC Parameters Menu.

You can set these options under this menu:

•Controller Type: The type of remote controller to be emulated. This setting must match that of the host. The choices are 5394, 5294, and 5251-12.

NOTE

The System/34 supports only the 5251-12 controller type. System/36 and System/38 do not support the 5394 remote controller.

•Controller Station Address: An address used to identify the emulator to the host system. This setting must match that of the host. Enter the address assigned to the host controller.

36