Black Box Remote Emulator Card, 5250 manual The Printer-Setup Menu

5250 REMOTE EMULATOR CARD

5.Press [ESC] twice and you are prompted to save this keyboard file. Answer Y to save your changes or N to discard the changes. Press [ENTER] and then [ESC] to return to the Main Menu.

6.3.3PRINTER SETUP

Use the Printer-Setup Menu (shown in Figure 6-10 below) to create a special or unique printer configuration.

Modify / Create /Delete / Exit			File Name = EM5251R
	______________________________
	Printer Setup
	Printer Commands Definition			Press
	ENTER to
			modify
	EBCDIC to ASCII translation		
	Code Page Selection	
	CPT Delimiters		50 6C
	17 to 15 Pitch Correction	
	AUTO Printer Sharing	
	Orientation	
	APO	
Menu	Command Options:	
	Paper Size
Change Option ↵ Select Options			<ESC>	Previous Screen
	Modify printer command parameters

Figure 6-10. The Printer-Setup Menu.

•Printer Commands Definition: Use the Printer Commands Definition option to define a new printer or modify the command strings for an existing printer. (This is not valid for 5219 and 3812 printing.)

Press [ENTER] and type in the session number of the printer to be added or modified when you are prompted for it. A menu of command strings (something like what is shown in Table 6-4 on the next page) will appear. (If you choose a text-only printer, only half of this menu will be shown, ending with the “Begin NLQ” command for Near Letter Quality.)

Enter all command strings as sequences of two-digit hexadecimal control codes, preceded by a hexadecimal number indicating how long the sequence is.

45