5250 REMOTE EMULATOR CARD
6. Configuration
Before the 5250 Remote Emulator Card can communicate with the host system, both the host system and the 5250 Remote Emulator Card software must be configured.
6.1 Configuring the Card
6.1.1LAUNCHING CONFIGURATION
The 5250 Remote Emulator Card’s configuration information is contained in a disk file. A standard default configuration file is included with the Card’s software. The default file can be changed, or you can create as many configuration files as needed.
The following keys are used throughout the configuration:
Key(s) | Function |
[ENTER] | Selects and saves your choice |
[ESC] (escape) | Returns to the previous screen |
[¨], [≠], [Æ], and [Ø] | Move from one option to another |
[SPACE] (space bar) | Erases the choice shown at the cursor location, |
| or toggles through the possible selections for |
| a given option |
Start the configuration process by following these steps:
1A. Under DOS: Make sure you are at the drive and directory where the 5250 Remote Emulator Card’s software is stored. Then type CD \5251R [ENTER]. Type RCONFIG at the DOS prompt and press [ENTER].
1B. Under Windows: Double click on the RConfig icon.
2.After a few moments, the Main Menu appears as shown in Figure
28
