Chapter 3, Operating Overview

Loading Configuration Information from Memory

Loading Configuration Information from Memory

The information about your setup and base station entered into the Configuration Information Menu can be saved in memory. This data is loaded automatically when you re-run the Software. You can also load the data manually. This procedure describes steps for manually loading the data.

Requirements

Steps

Data previously saved to a RAM disk.

1From the main menu, choose the Configuration Information Menu.

2Scroll down to Load Info From Memory and press the knob. The loading process takes only a fraction of a second. You should see your saved values in the

Configuration Information Menu.

3To return to the main menu level, press the Main Menu (k5) key.

Notes

See "Saving Configuration Information to Memory" on page 54 for a description

 

of saving the settings to memory.

55

Page 55
Image 55
HP 83236B S Interface manual Loading Configuration Information from Memory, Requirements Steps