Chapter 1, Getting Started
Introduction
Required
Equipment
You must supply:
Means to control base station and read FER.
CDMA PCS
Base Station.
Cables to connect the base station to the Test System. (See table below.)
Supplied with the Test System:
HP 8921A Opt. 600, 601, 603 or an
HP 8921A with an
HP 83203B or 83205A Cellular Adapter.
HP 83236A, B
PCS Interface
HP 83236A, B
Cable Kit
Cable Kit(Supplied with the HP 83236A,B)
CDMA PCS Base Station Test Software (Supplied with the HP 83236A, B)
Label:
HP 83236B System
Utility Software
Item | Connector at System end | Connections |
|
|
|
1 | N (m) | Connects base station’s transmitter test port to PCS Interface’s RF IN/OUT port. |
|
|
|
2 | N (m) | Connects PCS interface’s RF IN/OUT port to base station’s receiver test port. |
|
|
|
3 | BNC (m) | Connects |
|
|
|
4 | BNC (m) | Connects BS Timebase reference to timebase input on the Cellular Adapter. |
|
|
|
Figure 1
13
