Chapter 1, Getting Started

Step 2: Load and Run the CDMA/PCS BS Test Software

Navigation of the After the Software has loaded, you should see the CDMA/PCS BS Test

CDMA/PCS BS Software’s main menu screen on the display of the Test Set (see figure 5).

Test Software Important features of this screen are indicated in the figure with notes on their use.

Main Selection and Cursor Control

Some menu selections open lower-level menus, others allow entry of numeric data. To select a menu item, rotate the knob until the cursor is front of the selection and press the knob.

Entry Fields

Some main menu selections are entry fields. When these are selected, a highlighted area appears and you may key in a value with the DATA keys, or rotate the knob to change the value in the field. When the desired value is set, press the knob or the ENTER key.

Quit

Tuned Frequency

This area displays the frequency settings for the CDMA analyzer and signal generator.

USER Keys and their Fields

The USER Keys (k1 - k5) correspond to fields 1-5 at the top right corner of the test screen. They are used for navigation through menus and for making selections. In most lower-level menus, a “Prev Menu” key is provided to take you up one menu level.

Knob

The knob controls the cursor position on the display and is sometimes used to make numeric entries.

Figure 5

CDMA/PCS Test Software main menu features

17