Chapter 4, Troubleshooting
Errors When Loading and Running the Software
Menu Screens in this Book do not Match the Screens that You See
Problem:
You may have loaded another software procedure from the utility software memory card that is shipped with each PCS Interface. Procedures for Test System Connectivity (SYS_CONN) and Manual Control (MANUAL) also reside on the memory card and are loaded in the same manner as the CDMA/PCS BS test software.
Solution:
1Return to the main menu. If it does not read CDMA PCS Main Menu at the top of the display, you most likely have another program loaded and running.
2Pause the program by pressing the CANCEL key and press the TESTS key. In the TESTS menu, the Procedure Filename should be PCSCDMA.
3If not, follow the steps in "Getting Started" in chapter 1 to load and run the CDMA/PCS BS test software.
68