Chapter 3, Operating Overview

Viewing Instrument Connections

Viewing Instrument Connections

In setting up your Test System, you may have questions about connections between the Test Set, Cellular Adapter, and PCS Interface as well as the connections to the CDMA/PCS base station. In the Configuration Information Menu is a selection that displays connection diagrams for the front and rear panels.

Steps

1

From the main menu, select Configuration Information Menu.

 

2

Make sure that you have your desired entries in the fields of the Configuration

 

 

Information Menu (see Notes, below).

 

3

Scroll to and select Connection Drawing Menu.

 

4

For a diagram of front panel connections, scroll to and select Show Instrument

 

 

Front Panel Connections.

 

5

For rear panel connections, scroll to and select Show Instrument Rear Panel

 

 

Connections.

 

6

You can exit the connection diagram screen by pressing the Continue (k2) key.

 

7

Press the Prev Menu (k5) key to return to the Configuration Information

 

 

Menu.

 

8

Press the Main Menu (k5) key to return to the main menu level.

Notes

The connection diagrams change as a function of the entries into the

 

Configuration Information Menu. For this reason, make sure you have

 

entered your desired values before viewing the instrument connections.

Connection diagrams for each CDMA test are also shown in chapter 2, "Making Measurements".

58