Black Box Remote Emulator Card, 5250 manual Keyboard-Setup Menu

5250 REMOTE EMULATOR CARD

(text continued from page 40)

•Save Buffer: If you’re going to use 132-column screens with DOS graphics applications, you’ll need to allocate extra memory to make sure these screens are saved when you hotkey between sessions. Select 32K for 132-column screens used in DOS graphics applications, 16K for all other screens.

6.3.2KEYBOARD SETUP

Use the Keyboard-Setup Menu, shown in Figure 6-9 below, to customize the keyboard. You can modify the hotkey, enable or disable the type-ahead, and modify scan codes.

Modify / Create /Delete / Exit				File Name = EM5251R
______________________________
	Keyboard Setup
	Hot Key Code		Alt <01>	Press ENTER to
				modify
	Type Ahead		Enabled
	Scan Code Customize		
	" "
	Define hot key sequence
Menu Command Options:
	Change Option ↵	Select Options		<ESC> Previous Screen

Figure 6-9. The Keyboard-Setup Menu.

•Hot Key Code: The Hot Key Code is the series of keystrokes used to jump from a DOS session to a host session. The default is [ALT][ESC]. You can customize the hotkey code by pressing [ENTER] at this option. A new screen displaying the keyboard type will appear. Press the key you want to combine with [ALT] to form the hotkey, then press [ENTER].

43