Black Box 5250 manual Remote Emulator Card

5250 REMOTE EMULATOR CARD

Table 9-1 (continued). Error Codes.

SRC	Description	Possible Causes(s)
0057	Since the startup of the Controller	a. The display stations’s remote
	(at least 30 seconds ago), no valid	controller has not been varied
	SDLC frame has been received for	on, but one or more other
	this display station’s remote	remote controllers configured
	controller.	on the Controller are still
		varied on.
		b. The SDLC address configured
		for the display station’s remote
		controller doesn’t match the
		address configured on the host.
		c. The display station’s remote
		controller has not been
		configured on the host at all.
0058	It has been at least 30 seconds	The display station’s remote
	since any valid SDLC frame has	controller has been varied off, but
	been received for the display	one or more emulated remote
	station’s remote controller.	controllers in the same Controller
	However, frames addressed to this	are still varied on.
	remote controller were received
	earlier.
	This error normally shows up only
	on multi-card Controllers because
	it implies that other frames are
	still being received for other
	remote controller addresses;
	otherwise, error code 0056 would
	be displayed, indicating no frames
	are being received for any address.

84