Black Box Remote Emulator Card, 5250 manual For local operation direct connection to host

5250 REMOTE EMULATOR CARD

EM5251R Diagnostics Program

Select address range that corresponds to the EM5251R Switch Setting

300-30F

310-31F

320-32F

340-34F

350-35F

360-36F

380-38F

3A0-3AF

Menu Command Options:

Change Option ← Select Options [ESC] Previous

Screen

12.Use an appropriate cable to connect the 5250 Remote Emulator Card to a host’s communication port or to a modem:

For local operation (direct connection to host):

Across EIA RS-232D/CCITT V.24 interface: Cross-pinned DB44 male to DB25 female (product code EHN064-0020);

Across CCITT X.21 interface: Cross-pinned DB44 male to DB15 female (product code EHN063-0020);

Across CCITT V.35 interface: Cross-pinned DB44 male to 34-pin M-block male (product code EHN065-0020);

For remote operation (connection to host across modem link): Across EIA RS-232D/CCITT V.24 interface: Straight-through- pinned DB44 male to DB25 female (product code EHN061-

0020);

Across CCITT X.21 interface: Straight-through-pinned DB44 male to DB15 female (product code EHN060-0020);

Across CCITT V.35 interface: Straight-through-pinned DB44 male to 34-pin M-block male (product code EHN062-0020);

13.Remote operation only: Follow the modem manufacturer’s instructions for installing and configuring the modem to perform synchronous communication over your type of telephone line.

14.Remote operation only: Enter “N” at the prompt to let the Card initiate its modem-loopback test.

23