Operation
Operation
Charging the Battery
Replace and charge battery only in a
Batteries are initially 50% charged to provide optimum battery life and require charging before first use. It takes approximately 50 minutes to charge a dead battery to 80%, at which point it can be used. It will take approxi- mately 75 minutes to fully charge a dead battery.
1.Place charger in a dry,
2.Plug charger into an electrical outlet and slide bat- tery into charger as shown (light will turn on in 5 seconds).
ti19341a
3.When battery becomes fully charged, immediately unplug the charger from the power supply and remove the battery from the charger.
NOTE: The amount sprayed with each battery varies depending on material, spray tip size, battery charge, and battery temperature. One battery fully charged will spray up to one gallon. Amount sprayed will be less depending on spray tip size, material sprayed, life of battery, temperature, and other environmental factors.
Charger Status Indicator Lights
| Label |
|
|
| Appearance | Description | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Solid green light | Indicates a full charge. Battery can be used. |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Flashing green light | Battery is charging, indicates 80% charge. |
|
|
|
|
|
| Battery can be used. | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Flashing red light | Battery is charging, indicates less than 80% charge. |
|
|
|
|
|
| Do NOT use battery. | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Battery is too hot or too cold to charge. Remove battery and allow to cool or |
|
|
|
|
|
| Solid red light | warm up before charging. Battery temperature must be between |
|
|
|
|
|
|
| 50° F - 113° F (10° C - 45° C) to charge. |
Both lights
Battery has internal fault or has experienced damage. Do not use.
3A2308C | 7 |
