Unclogging Spray Tip/Guard Assembly

Always perform the Pressure Relief Procedure (page 9) before unclogging spray tip.

1.To unclog tip obstruction, engage trigger lock and put prime/pressure relief valve UP to relieve pres- sure.

ti19347a

ti19350a

2. Reverse spray tip to UNCLOG position.

ti19370a

3.Aim sprayer at waste area, disengage trigger lock, and put prime/pressure relief valve DOWN to spray position. Pull trigger to clear clog.

ti19374ati19346a

4.Engage trigger lock. Put prime/pressure relief valve UP to relieve pressure and rotate spray tip back to SPRAY position.

ti19347a

ti19371a

ti19350a

Operation

5.Disengage trigger lock, put prime/pressure relief valve DOWN to spray position, and resume spray- ing.

ti19346a ti19374a

6.If tip is still clogged, it may be necessary to repeat steps 1 - 5 and rotate the tip from SPRAY to UNCLOG several times. Repeat step 1 to release pressure, remove and clean filter, or replace with new tip assembly.

ti19349a

7.When obstruction is cleared, engage trigger lock and rotate arrow-shaped handle back to SPRAY position.

ti19350a

ti19371a

18

3A2308C

Page 18
Image 18
Graco 16N654, 16H960, 16N655, 16N927, 16N656 important safety instructions Unclogging Spray Tip/Guard Assembly