Graco 16H960, 16N655, 16N927, 16N654, 16N656 important safety instructions Ti19857a Ti19860a

2.If unit has accessible retaining bolt shown below, proceed to step 3. If unit does not have accessible retaining bolt, proceed to step 5.

Repair

5.Install new gear into drive housing. Pull the clam- shell up and screw in retaining bolt to retain gear. Torque to 30 in-lb (3.4 N•m).

ti19858a

3.Install new gear into drive housing. Screw retaining bolt into drive housing to retain gear. Torque to 30 in-lb (3.4 N•m).

ti19857a

ti19860a

4.Install pump module to drive module. See Pump Module/Drive Module, page 31.

ti19624a

ti19860a

ti19879a

6.Install two bolts connecting drive to clamshell. Torque to 50 in-lb (5.6 N•m). Install four screws connecting clamshell halves. Torque to 9 in-lb (1.0 N•m).

ti19862a ti19880a

7.Install pump module to drive module. See Pump Module/Drive Module, page 31.

40 3A2308C