Operation

Cleaning Sprayer Exterior

Wipe paint off outside of sprayer using a soft cloth moistened with water or flushing fluid. Do NOT sub- merge the sprayer or pump.

ti19400a

This sprayer is equipped with a static wick that reduces the build up of static charge to reduce the risk of fire and explosion.

KEEP THIS SURFACE

CLEAN OF OVERSPRAY.

ti19405a

 

Storage

1.Fill material cup 1/3 full with mineral spirits solvent or dilute a 4 oz. bottle of Pump Armor concentrate with an additional 4 oz. of water in material cup and liner.

2.Connect cup to sprayer, put prime/pressure relief valve to UP position.

3.Disengage trigger lock, turn sprayer upside-down and trigger for approximately 10 seconds to recircu- late material.

ti19374a

ti19358a

4.Reverse tip to UNCLOG position. Put prime/pres- sure relief valve DOWN to spray position and trigger sprayer through tip into waste area for 1- 2 seconds.

ti19370ati19346a

ti19366a

5.Properly dispose of used storage fluid from material cup.

6.Recharge battery to full charge before storage. See Charging the Battery, page 7.

7.Store sprayer indoors in a cool, dry place. Never store sprayer with material in the cup.

ti19347a

ti19384a

3A2308C

21

Page 21
Image 21
Graco 16N655, 16H960, 16N927, 16N654, 16N656 important safety instructions Cleaning Sprayer Exterior, Storage