Repair
Pump Module/Drive Module
Removal
1.Engage trigger lock and put prime/pressure relief valve in UP position to relieve pressure.
ti19347a ti19350a
2. Remove material cup and battery.
5. Remove pump module (35) from drive module (11).
11
35
ti19625a
Installation
1. Engage trigger lock and remove battery from unit.
ti19350a
ti19617a
ti19360a
ti19617a
2.Assemble pump module (35) to drive module (11). Gears must properly engage for assembly. Slightly rotate pump assembly as needed for proper engagement.
3.Unscrew swivel bolt (22) by pressing down and turning it
22
ti19621a
4. Unscrew bolt (20). Use tool if needed.
20 
ti19618a
11
35
ti19624a
3.Assemble swivel bolt (22) and bolt (20). Partially thread both bolts before tightening either bolt. Use tool to tighten and make sure bolts are secure. NOTE: Make sure there is no gap between the two housings when assembling bolts.
22
20
ti19622a
3A2308C | 31 |
