Repair
Gear Replacement
4. Remove four screws holding clamshells together and two bolts connecting drive to clamshell.
Removal
1.Remove pump module from drive module. See Pump Module/Drive Module, page 31.
ti19625a
2.If unit has accessible retaining bolt shown below, proceed to step 3. If unit does not have accessible retaining bolt, proceed to step 4.
ti19858a
3.Unscrew retaining bolt until gear (48) is no longer retained. Remove gear from drive. Proceed to Installation.
ti19859a
48
ti19860a
ti19877ati19861a
5.Pull the clamshell up and unscrew retaining bolt until gear (48) is no longer retained. Remove gear from drive. Proceed to Installation.
ti19878a
48
ti19860a
Installation
1. Engage trigger lock and remove battery from unit.
ti19350a
ti19617a
3A2308C | 39 |
