installing your washer
UNPACKING YOUR WASHER
Unpack your Washer and inspect it for shipping damage. Make sure you have received all of the items shown below. If your Washer was damaged during shipping, or you do not have all of the items, contact the brick
OVERVIEW OF YOUR WASHER
Hot water supply |
|
hose | Cold water supply hose |
Detergent drawer 
Control panel
Door
Drain Hose
Adjustable leg
(use for the Upper Bolt Hole)
Spanner | Bolt hole covers | Water Supply Hose Rubber Washer Hose guide Rubber Cup Tape |
|
|
|
BASIC LOCATION REQUIREMENTS
Electrical
•120 Volt 60 Hz 15 AMP fuse or circuit breaker
•Individual branch circuit serving only your Washer is recommended.
•Your Washer is equipped with a power cord.
NEVER USE AN EXTENSION CORD.
CAUTION
6_ Installing your washer
