Whirlpool W10120516A Troubleshooting, Storage Drawer, Nothing will operate, To Replace, To Remove

Models: W10120516A

1 36
Download 36 pages 34.17 Kb
Page 16
Image 16
Storage Drawer

To Replace:

1.Insert both hanger arms into the door.

2.Open the oven door.

You should hear a “click” as the door is set into place.

3.Move the hinge levers back to the locked position. Check that the door is free to open and close. If it is not, repeat the removal and installation procedures.

Storage Drawer

The storage drawer can be removed. Before removing, make sure drawer is cool and empty.

To Remove:

1.Pull the storage drawer straight back past the drawer stop notch and the end of the side rails.

To Replace:

1.Lift up the back of the drawer and place it inside the range in its fully forward position.

2.Lift up the front of the drawer to a level position.

3.Slowly push the drawer into the range until the drawer side rails engage with the gap in the drawer glides.

A

A. Engage drawer glide.

4.Once the drawer is fully engaged on both sides, slide the drawer back into the closed position.

NOTE: When you are removing and replacing the storage drawer, a slight push may be needed to move the drawer stop notch past the drawer glides.

AB

A.Drawer stop notch

B.End of side rail

2.Lift up the back of the drawer and pull the drawer out.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

Is the power supply cord unplugged? Plug into a grounded outlet.

Has a household fuse blown, or has a circuit breaker tripped?

Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Cooktop will not operate

Is the control knob set correctly? Push in knob before turning to a setting.

Excessive heat around cookware on cooktop

Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than ½" (1.3 cm) outside the cooking area.

Hot Surface indicator light stays on

Does the Hot Surface indicator light stay on after control knob(s) have been turned off?

See “Cooktop Controls” section.

On ceramic glass models, is the oven control lockout set?

Cooktop cooking results not what expected

See “Oven Control Lockout” section.

Is the proper cookware being used? See “Cookware” section.

16

Page 16
Image 16
Whirlpool W10120516A manual Troubleshooting, Storage Drawer, Nothing will operate, Cooktop will not operate, To Replace