Chapter 2 Avaya C460 CLI Commands

Example:

To display netmasks in decimal format:

C460-1(configure)#ip netmask-format bitcount decimal

Done!

ip ospf authentication-key

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use the ip ospf authentication-keycommand to configure the interface authentication password.

Use the no ip ospf authentication-keycommand to remove the OSPF password.

The syntax for this command is:

[no] ip ospf authentication-key <key>

key

string (up to 8 characters)

Example:

Router-1(configure-if:marketing) # ip ospf authentication-

key my_pass

ip ospf cost

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use the ip ospf command to configure interface metric.

Use the no ip ospf cost command to set the cost to its default. The default is 1.

The syntax for this command is:

[no] ip ospf cost <cost>

costinteger

Avaya C460 Reference Guide

51

Page 63
Image 63
Avaya manual C460-1configure#ip netmask-format bitcount decimal, No ip ospf authentication-key key, Key mypass