Avaya C460 manual Router vrrp, Session

Chapter 2 Avaya C460 CLI Commands

To enable the RIP protocol:

C460-1(configure)# router rip

Done!

router vrrp

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode. Use the command to enable VRRP routing globally.

Use the no router vrrp command to disable VRRP routing.

The syntax for this command is:

[no] router vrrp

Example:

C460-1(configure)# router vrrp

Done!

session

User level: read-only, read-write, admin.

Displays existing sessions or to opens a session with a specific Supervisor Module in the chassis.

The syntax for this command is:

session [[module_number>] {switch router}]

module	The Supervisor module number (1 to 2).
switchrouter	• The entity to which you want to open a
(Optional)	session.
	• If you do not specify this parameter, you
	will get the default entity of the specific
	module:
	• switch - Layer 2 entity of the module.
	• router - Routing entity

Avaya C460 Reference Guide 79