Chapter 2 Avaya C460 CLI Commands

“marketing”.

Router-1(configure-if:marketing) # ip rip authentication

mode simple

ip rip default-route-mode

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the ip rip default-route-modecommand to enable learning of the default route received by the RIP protocol. The default state is talk-listen.

The syntax for this command is:

ip rip default-route-mode <mode>

The possible default route modes on an interface are:

talk-listen

Set RIP to send and receive default route updates on

 

the interface.

talk-only

Set RIP to send but not receive default route updates

 

on the interface.

Example:

 

Router-1(configure-if:marketing) # ip rip default-route-

mode talk listen

Done!

ip rip poison-reverse

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the ip rip poison-reversecommand to enable split-horizon with poison-reverse on an interface.

Use the no ip poison-reversecommand to disable the poison-reverse mechanism.

The split-horizon technique prevents information about routes from exiting the router interface through which the information was received. This prevents routing

56

Avaya C460 Reference Guide

Page 68
Image 68
Avaya C460 manual Mode simple, Ip rip default-route-mode mode, Mode talk listen, Ip rip poison-reverse