Avaya manual Set dot1x tx-period, C460-1super#set dot1x tx-period, Set icmp-redirect

Chapter 2 Avaya C460 CLI Commands

•When a RADIUS server is not defined:

C460-1(super)#set dot1x system-auth-control enable

***Warning : Authentication server ( RADIUS ) is disabled/ not-exist and so,

***no authentication can be made

dot1x system-auth-control enabled

set dot1x tx-period

User level: supervisor

Use the set dot1x tx-periodcommand to set the time interval between attempts to access the Authenticated Station.

The syntax for this command is:

Example:set dot1x tx-period <Seconds>

Seconds Interval in seconds

C460-1(super)#set dot1x tx-period 90

Done!

set icmp-redirect

User level: read-write, admin.

Use the set icmp-redirect CLI command to accept or reject incoming ICMP-redirect requests.

The syntax for this command is:

set icmp-redirect {acceptreject}

Accept	Accept inoming ICMP-redirect requests
Reject	Reject incoming ICMP-redirect requests
Example:

C460-1#set icmp-redirect accept

Done!

Avaya C460 Reference Guide 87