Avaya C460 manual Show spv

Chapter 2	Avaya C460 CLI Commands
	Output fields:
	Field	Description
	Spanning tree	Spanning-Tree Protocol status (enabled or disabled).
	Designated root	MAC address of the designated spanning-tree root
		bridge
	Designated Root	Priority of the designated root bridge.
	Priority
	Designated Root Cost	Total path cost to reach the root.
	Designated Root Port	Port through which the root bridge can be reached
		(shown only on non root bridges)
	Root Max Age	Amount of time a BPDU packet should be considered
		valid
	Hello Time	Number of times the root bridge sends BPDUs
	Bridge ID MAC ADDR	Bridge MAC address used in the sent BPDUs
	Bridge ID Priority	Bridge Priority
	Port	Port number
	Port-State	Spanning-tree port state (disabled, inactive, not-
		connected, blocking, listening, learning, forwarding,
		bridging, or type-pvid-inconsistent)
	Cost	Cost associated with the port
	Priority	Priority associated with the port

show spv

User level: read-only, read-write, admin.

Use the show spv command to display the following information about supervisor modules:

• Chassis MAC address

• SPV status – active, standby, halted.

• Indication whether the SPV’s are synchronized.

• Software version of the two image banks.

The syntax for this command is: show spv

214 Avaya C460 Reference Guide