Avaya C460 manual Show running-config, Router-1show running-config

Chapter 2 Avaya C460 CLI Commands

show running-config

User level: read-only, read-write, admin.

Use the show running-config command to display the current router configuration information.

The syntax for this command is:

show running-config

Example:

Router-1>show running-config

Router-1>

!Avaya Inc.- C460ML Multi-layer Switch - Router configuration

!version 2.0.2

ip access-list-name 100 "list #100"
ip access-list-owner 100			"egotlieb@135.64.102.64"
ip access-list 100		1 permit ip		any any
ip access-list 100		2 fwd3 udp		any eq 68 any eq 67
!
set vlan	2 name "vlan2"
no rmon2	protocol-dir TCP		20
no rmon2	protocol-dir TCP		23
no rmon2	protocol-dir TCP		25
no rmon2	protocol-dir TCP		80
no rmon2	protocol-dir TCP		110
no rmon2	protocol-dir UDP		161
no rmon2	protocol-dir UDP		162
rmon2 protocol-dir TCP 1111 "1111--TCP"
rmon2 protocol-dir TCP 2222 "2222--TCP"
!
interface "11"
ip vlan	name "Default"
ip address 11.11.11.1			255.255.255.0
!
--type q	to quit or space key to continue--
interface "12"
ip vlan	name "vlan2"
ip address 12.12.12.1			255.255.255.0
!
interface "78"
ip vlan	name "Default"
ip address 149.49.78.71			255.255.255.0
!
ip default-gateway 149.49.78.1				1 low

Avaya C460 Reference Guide 209