C460-1 show ip access-lists, Show ip access-list-summary

			Chapter 2 Avaya C460 CLI Commands
Example:
C460-1>show ip access-lists
ip access-list 100	10	deny-and-notify tcp
192.168.55.0	0.0.0.255		range 5000 6000
any range 7000	8000
ip access-list 100	30	deny udp
any
any
optional
ip access-list 100	35	deny ip
any
any
ip access-list 100	55	fwd7 tcp
host 192.168.3.4		eq	33333
host 10.6.7.8
default action for	list 100 is permit

show ip access-list-summary

User level: user, privileged, supervisor

Use the show ip access-list-summarycommand to display a summary of policy lists.

The syntax for this command is:

show ip access-list-summary

Example:

C460-1>show ip access-list-summary

The policy lists summary: default List (0)

show ip arp

User level: read-only, read-write, admin.

Use the show ip arp command to display the Address Resolution Protocol (ARP) cache.

The syntax for this command is:

show ip arp [<if-name> <vlan> <ip addr> <ip-mask> static]

if-name

Interface name (string up to 32 chars)

Avaya C460 Reference Guide

157

Page 169

Image 169

Avaya manual C460-1 show ip access-lists, Show ip access-list-summary, C460-1show ip access-list-summary, Show ip arp

Contents

Avaya C460 Avaya.com Contents Contents Avaya C460 Reference Guide Iii Contents Contents Contents Avaya C460 Reference Guide Vii Viii Avaya C460 Reference Guide Contents Contents Using the CLI Conventions Used Command line prompt looks as follows Navigation, Cursor Movement and Shortcuts Command Abbreviations C460-1#set port negotiation 2/4 disable Retstatus commandTree command C460-1#retstatus Terminal width character Terminal widthC460-1terminal width 80 terminal width Terminal length Clear screen Clear screenC460-1clear screen Session router Avaya C460 Sessions Entering the Supervisor Level Security Levels Entering the Technician Level Entering the CLIC460-1help show Prompt changes to Routerconfigure routerprotocolname# Prompt changes to Routerconfig-ifinterfacename# Chapter Using the CLI Avaya C460 Reference Guide Area Access list Arp timeout C460-1configure#arp 192.168.7.8 00400d8c2a01Arp No banner login No arp timeout secondsBanner login line Banner post-login C460-1super#banner post-login No banner post-loginBanner post-login line Clear arp-cache Clear cam C460-1super#clear dot1x configC460-1#clear cam Clear dynamic vlans Clear event-log C460-1#clear dynamic vlansC460-1#clear event-log Clear fragment C460-1#clear interface outband Clear interfaceClear ip route C460-1#clear ip route 134.12.3.0 Clear ip traffic C460-1configure#clear ip route 192.168.49.1Router-1#clear ip traffic Clear log Clear radius authentication serverprimarysecondary Clear radius authentication serverC460-1#clear port mirror 9/2/10/4 Clear port static-vlan Clear rmon2 statistics C460-1super#clear radius authentication server secondaryRouter-1#clear rmon2 statistics Clear snmp trap Clear system-log modulenumber C460-1#clear snmp trapC460-1#clear system-log Clear timezone Clear vlan C460-1configure#clear vlan 2 name vlan2C460-1#clear vlan Clear vlan Layer Copy l2-config tftp filename ip ConfigureC460-1#copy l2-config tftp c\C460\config C460-1#copy running-config tftp c\c460\startup.cfg C460-1#copy running-config startup-configC460-1#copy running-config tftp /folder/c460/startup.cfg Copy startup-config tftp C460-1#copy startup-config tftp /folder/c460/startup.cfg Router-1#copy startup-config tftp c\c460\startup.cfgC460-1#copy tftp EW-archive c\C460\switch1.cfg Copy tftp EWarchive filename ip C460-1#copy tftp l2-config c\C460\backup Copy tftp l2-config filename ipCopy tftp startup-config filename ip Router-1copy tftp startup-config c\C460\router1.cfg C460-1#copy tftp SWimageA c\imgA.bin Copy tftp SWimageA filename ipCopy tftp SWimageB Copy tftp SWimageB filename ip Default-metric Ospf Default-metricNo default-metric number Disable interface Default-metric RIPDisable interface outband inband C460-1#disable interface outband Enable interface outband inband Enable interfaceEnable vlan commands Enable vlan commands C460-1#erase startup-config Erase startup-configC460-1#fragment chain No fragment size database-limit Router-1#fragment timeout Fragment timeoutRouter-1#fragment size Get time Hostname Layer C460-1#hostname gregoryRouter-1hostname Marketing Interface Ip access-group Ip access-default-action Ip access-list Ip access-list-cookie C460-1configure#ip access-list 101 23 deny ip any 1.2.0.0C460-1configure#ip access-list-cookie 101 Ip access-list-copy Ip access-list-dscp name C460-1configure#ip access-list-copy 100C460-1configure#ip access-list-name 101 16 special Ip access-list-dscp operation Ip access-list-dscp precedence policy-list-number dscp Ip access-list-dscp precedence Ip access-list-dscp trust C460-1configure#ip access-list-dscp precedenceIp access-list-name Ip access-list-owner C460-1configure#ip access-list-name 101 morningRouter-1ip access-list-owner 101 admin Ip address Ip admin-state up/down Ip admin-stateIp bootp-dhcp network 255.255.255.0 Ip bootp-dhcp relay No ip bootp-dhcp network ip-addressC460-1configure#no ip bootp-dhcp relay 192.168.169.0 192.168.37.46 Ip bootp-dhcp server ip-addressIp broadcast-address bc addr 192.168.255.255 C460-1configure#ip default-gateway Ip default-gatewayIp directed-broadcast No ip directed-broadcast No ip icmp-errors Ip icmp-errorsC460-1configure#ip max-arp-entries Ip max-arp-entries C460-1configure#ip max-route-entries C460-1configure#no ip max-arp-entriesNo ip netbios-rebroadcast mode No ip max-route-entries value No ip netmask-format mask-format Ip netmask-format No ip ospf authentication-key key C460-1configure#ip netmask-format bitcount decimalKey mypass No ip ospf cost cost No ip ospf dead-interval seconds Ip ospf dead-intervalIp ospf hello-interval No ip ospf hello-interval seconds No ip ospf priority priority Ip ospf priorityIp ospf router-id No ip ospf router-id router id Router-1ip ospf router-id Ip rip authentication keyIp proxy-arp Ip redirects Ip rip authentication mode No ip rip authentication key passwordKey hush-hush Ip rip default-route-mode Mode simpleIp rip default-route-mode mode Mode talk listen Ip rip rip-version Ip rip rip-versionIp rip send-receive-mode Ip rip split-horizon Ip route C460-1configure#ip route 192.168.33.0 255.255.255.0Ip routing No ip routing Ip routing-mode modeIp routing-mode Ip simulate C460-1configure#ip simulate 100 192.67.85.12Ip vlan/ip vlan name Ip vrrp No ip vlan vlan-idNo ip vrrp vr-id Ip vrrp address 10.0.1.2 No ip vrrp vr-idaddress ip-addressIp vrrp auth-key No ip vrrp vr-idauth-key key-string Owner No ip vrrp vr-idoverride addr ownerIp vrrp preempt Ip vrrp primary 192.168.66.23 No ip vrrp vr-idprimary ip-addressIp vrrp priority No ip vrrp vr-idpriority pri-value Line Ip vrrp timer Network RIP C460-1super#line 5 C460 CLINetwork Ospf C460-1#no rmon alarm No rmon alarm Alarm IndexArea No rmon event Event Index C460-1#no rmon history No rmon history History IndexNo username name C460-1super#no username john C460-1#nvram initialize Nvram initialize switch allPassive-interface Router-1#passive-interface FastEthernet C460-1ping PingPing Layer Redistribute Ospf Router-1ping 149.49.48.1No redistribute protocol Redistribute RIP Reset Avaya C460 CLI Commands Rmon alarm Rmon history Rmon event Rmon2 protocol-dir C460-1#rmon history 1026 1026 3/2 30 buckets 20 owner amirRmon2 protocol-dist Router ospf Router-1#rmon2 protocol-distNo router ospf Router-1 super # router ospf Session Router vrrp C460-1super#set allowed managers enabled Set allowed managers enableddisabledC460-1session router Set allowed managers Set arp-aging-interval C460-1super#set allowed managers ip addSet arp-aging-interval value C460-1#set arp-aging-interval C460-1#set boot bank a Set boot bank valueSet broadcast storm control enabledisable C460-1#set broadcast storm enable Set broadcast storm control threshold threshold Set device-mode modeC460-1#set broadcast storm control threshold C460-1super# set device-mode Router C460-1super#set dot1x max-req Set dot1x max-req countSet dot1x quiet-period Seconds C460-1super#set dot1x quiet-period C460-1super#set dot1x server-timeoutSet dot1x re-authperiod Seconds C460-1super#set dot1x re-authperiod C460-1super#set dot1x supp-timeout Set dot1x supp-timeout SecondsC460-1super#set dot1x system-auth-control disable C460-1super#set dot1x system-auth-control enable C460-1super#set dot1x tx-period Set dot1x tx-periodSet icmp-redirect C460-1#set icmp-redirect accept C460-1#set intelligent-multicast enable Set intelligent-multicast enabledisableSet inband vlan vlannum Set intelligent-multicast client-port-pruning time time C460-1#set intelligent-multicast group-filtering-delay time Set intelligent-multicast group-filtering delay timeC460-1#set intelligent-multicast client-port-pruning-time Set intelligent-multicast router port pruning time C460-1#set interface inband 1 1.1.1.1 Set interface inbandSet interface outband Set interface outband ipaddr netmask C460-1#set interface outband 149.49.75.174 Set interface ppp enable/disable/off/resetSet interface ppp C460-1#set interface ppp 149.49.34.125 C460-1#set interface ppp enable C460-1#set interface ppp resetC460-1#set interface ppp disable Set ip route C460-1#set ip route 0.0.0.0 24 C460-1#set license 026 9b8 216 908 dea f4d layer-3 Set licenseSet logout Set mac-aging C460-1#set logoutSet mac-aging status Set mac-aging-time Set outband duplex C460-1#set mac-aging-timeSet outband duplex full half C460-1#set outband duplex full C460-1#set outband negotiation enable Set outband negotiation enable disableSet outband speed speed C460-1#set outband speed 100MB Router-1#set policy type all Set port auto-negotiation-flowcontrol-advertisement module Set port auto-negotiation-flowcontrol-advertisementSet port channel Set port classification C460-1#set port channel 4/6,18 on server2C460-1#set port classification 2/19 valuable Set port disable module/port Set port disableC460-1#set port disable 4/1 Set port dot1x initialize C460-1super#set port dot1x max-req 1/2 Set port dot1x max-reqSet port dot1x port-control Set port dot1x re-authentication Set port dot1x re-authenticateSet port dot1x quiet-period C460-1super#set port dot1x quiet-period 4/2 Set port dot1x re-authperiod Set port dot1x server-timeoutC460-1super#set port dot1x re-authperiod 1/2 Set port dot1x supp-timeout C460-1super#set port dot1x server timeout 1/2C460-1super#set port dot1x supp-timeout 1/2 Set port dot1x tx-period C460-1super#set port dot1x quiet-period 1/2 Set port edge admin stateSet port duplex C460-1#set port duplex 4/1 full C460-1#set port edge admin state 3/1 non-edge-port C460-1#set port edge admin state 3/1 edge-portSet port enable Set port enable module/port C460-1#set port enable 4/1 C460-1#set port flowcontrol receive 5/1 on Set port flowcontrolC460-1#set port flowcontrol send 5/1 off C460-1#set port level 3/1 Set port levelSet port mirror Set port mirror source-port module/port mirror-port module C460-1#set port name 4/21 arthur Set port nameSet port negotiation Set port point-to-point admin status C460-1#set port negotiation 4/1 disable Set port powerinline C460-1#set port point-to-point admin status 1/1 force-trueSet port powerinline priority C460-1#set port redundancy enable Set port redundancy enabledisableSet port redundancy Set port redundancy-intervals Set port redundancy on/off C460-1#set port redundancy-intervals 100 C460-1#set port spantree enable 3/1Set port spantree Set port spantree cost module/port value Set port spantree costSet port spantree force-protocol-migration Set port spantree priority C460-1#set port spantree force-protocol-migration 1/1Set port spantree priority module/port value C460-1#set port spantree priority 3/4 Set port static-vlan C460-1#set port speed 4/1 100MBC460-1#set port static-vlan 3/4-6 Set port trap Set port vlan C460-1#set port trap 3/2 enable C460-1#set port vlan 2 3/5 Set power redundancySet port vlan-binding-mode Set port vlan-binding-mode portlist value Set powerinline budget C460-1#set power redundancy enableC460-1#set powerinline budget Set ppp authentication incoming Set ppp baud-rate C460-1#set ppp authentication incoming chapC460-1#set ppp baud-rate 38400 ppp baud rate was set to Set ppp chap-secret chap-secret C460-1#set ppp incoming timeout Set ppp incoming timeout timeC460-1super#set radius authentication enable Set radius authentication retry-number number C460-1super#set radius authentication retry-time Set radius authentication retry-time timeSet radius authentication secret string C460-1super#set radius authentication secret hush Set radius authentication udp-port number Set radius authentication udp-portC460-1super#set radius authentication udp-port number Set slot power admin C460-1set slot power admin 4 down C460-1set slot power admin 4 upSet slot power priority C460-1#set slot power priority 3 high Set slot power priority slot levelC460-1#set snmp community read-only read Set snmp retries number C460-1#set snmp timeout Set snmp timeout numberC460-1#set snmp retries Set snmp trap rcvraddr C460-1#set snmp trap 192.168.173.42 enable all C460-1#set snmp trap 192.168.173.42 enable configC460-1#set snmp trap 192.168.173.42 disable config Set snmp trap enabledisable auth C460-1#set spantree default-path-cost rapid-spanning-tree Set spantree default-path-costSet spantree enable/disable Set spantree hello-time Set spantree forward-delayC460-1#set spantree hello-time Set spantree max-age Set spantree priority C460-1#set spantree max-ageSet spantree priority bridgepriority C460-1#set spantree priority Set spantree version C460-1#set spantree tx-hold-countSet system contact Set system contact string C460-1#set system location tech-support Set system location stringSet system name string C460-1#set system name C460-1 C460-1#set time client enable Set time client enabledisableC460-1set time protocol sntp-protocol C460-1set time protocol time-protocol Set time server ip address Set time serverC460-1#set time server Set timezone C460-1#set trunk 3/3 dot1q Set trunkSet vlan C460-1#set vlan 3 name gregory Set vlan Layer C460-1configure#set vlan 2 name vlan2Set web aux-files-url Set welcome message Show access listsC460-1#set welcome message avaya Show allowed managers status Router-1show access-listsShow allowed managers status C460-1super#show allowed managers status Show allowed managers table Show allowed managers tableC460-1super#show allowed managers table C460-1show arp-aging-interval Show arp-aging-intervalC460-1show arp-tx-interval C460-1show banner post-login C460-1show banner loginShow boot bank C460-1show boot bank C460-1show broadcast storm control Show broadcast storm controlShow cam 146 Avaya C460 Reference Guide C460-1 show cam mac Show cam macShow cam vlan C460-1show cam vlan C460-1show chassis-identity Show chassis-identityShow copy status C460-1show copy status Show cpu load Show cpu loadC460-1show cpu load Show cs Show device-mode C460-1show dot1x modeC460-1show device-mode Show dynamic vlans Router-1show dynamic vlans C460-1show dot1x statisticsShow environment fans C460-1show environment fans Show environment power Show environment power Show event-log Show erase statusShow event log Show icmp-redirect Router-1show fragmentC460-1show icmp-redirect Show image version C460-1show intelligent-multicast C460-1#show ip access group access-groupShow interface C460-1show interface C460-1 show ip access-list-dscp Show ip access-list-dscpShow ip access-lists Show ip access-listspolicy-list-number Show ip access-list-summary C460-1 show ip access-listsC460-1show ip access-list-summary Show ip arp Show ip icmp Show ip icmpRouter-1show ip icmp Router-1show ip interface Showing 2 Interfaces Show ip interface Router-1show ip interface brief Show ip interface briefShow ip ospf Router-1show ip ospf Router-1 super # show ip ospf interface Show ip ospf databaseShow ip ospf interface interface-name Router-1show ip ospf interface Router-1show ip ospf neighbor Show ip ospf neighborShow ip protocols Show ip protocols protocol Router-1sh ip reverse-arp 0010a49897e0 Show ip reverse-arpShow ip route C460-1show ip route Show ip route best-match dst addr Show ip route Router-1show ip routeRouter-1show ip route best-match Show ip route static ip addr mask Show ip route summary Router-1sh ip route staticRouter-1sh ip route summary Show ip traffic Router-1show ip traffic Show ip unicast cache ip addr Show ip unicast cache Show ip unicast cache networks Router-1 show ip unicast cacheShow ip unicast cache networks net addr net mask Router-1show ip unicast cache networks Show ip unicast cache networks detailed Show ip unicast cache networks detailednet addr net mask192.168.6.0 Show ip unicast cache nextHop Router-1show ip unicast cache summary Show ip unicast cache summaryShow ip vrrp Show ip vrrp detail Show ip vrrp detail 172 Avaya C460 Reference Guide Show l2-config Show l2-configC460-1show l2-config 174 Avaya C460 Reference Guide Avaya C460 Reference Guide 175 176 Avaya C460 Reference Guide Avaya C460 Reference Guide 177 178 Avaya C460 Reference Guide Avaya C460 Reference Guide 179 180 Avaya C460 Reference Guide Avaya C460 Reference Guide 181 182 Avaya C460 Reference Guide C460-1show license Show licenseShow logout C460-1show logout Show mac-aging-time C460-1show mac-agingC460-1show mac-aging-time Show module Show module Show outband Show outbandC460-1show outband Show policy type C460-1show port 3/4 Show port Set auto-negotiation-flowcontrol-advertisement module/port Show port auto-negotiation-flowcontrol-advertisementShow port channel C460-1 show port channel 3/3 info C460-1 show port channel Show port classification module/port Show port classificationC460-1show port classification 4/8 C460-1show port classification 4/9 Port Port Classification C460-1 show port dot1x 3/3 Show port dot1x 192 Avaya C460 Reference Guide C460-1show port statistics 1/1 Show port dot1x statistics C460-1show port edge state Show port edge stateShow port flowcontrol Show port flowcontrol module/port Show port mirror C460-1show port flowcontrol 3/4Show port mirror Show port point-to-point status C460-1show port mirror port mirroringC460-1show port point-to-point status Show port redundancy Show port redundancyC460-1show port redundancy Show port trap Show port vlan-binding-mode Show powerinlineShow port vlan-binding-mode module/port Show powerinline budget C460-1 show powerinline Show ppp authentication C460-1 show powerinline budgetC460-1show ppp authentication Show ppp baud-rate C460-1show ppp configuration Show ppp configurationShow ppp incoming timeout C460-1show ppp incoming timeout C460-1 show radius authentication Show radius authenticationShow rmon alarm Show rmon alarm Alarm Index Show rmon event C460-1show rmon alarmShow rmon event Event Index C460-1show rmon event Show rmon history History Index Show rmon historyC460-1show rmon history Show rmon statistics Show rmon2 dscp-stats C460-1show rmon statisticsRouter-1 show rmon2 dscp-stats Router-1show rmon2 protocol-dir Show rmon2 protocol-dirShow rmon2 protocol-dist Avaya C460 Reference Guide 207 Router-1show rmon2 state Show rmon2 state Router-1show running-config Show running-config C460-1#show secure current Show secure current C460-1show snmp Show snmp C460-1show snmp timeout Show snmp timeoutShow snmp retries C460-1show snmp retries C460-1show spantree Show spv C460-1 show spv Router-1show startup-config Show startup-config Show system-log Show systemShow system log Show system-log slot C460-1show system-log Show tftp download software status Show system-log LayerShow tftp download software status modnum C460-1show tftp download software status C460-1show tftp upload status Syntax for this command is Show timeC460-1show time Show time parameters Show timezone Show timezoneC460-1show timezone Show trunk Show username Show usernameShow vlan Show vlan Show vlan Layer C460-1 show vlanShow web aux-files-url Show web aux-files-url Sync spv Sync spvC460-1super# sync spv Tech C460-1terminal width Timers basic RIP update timer in seconds minimum = No timers spf spf-holdtime Timers ospf Traceroute host TracerouteRouter-1traceroute Tree Username Validate-group C460-1super#username root password secret access-type admin Validate policy-list C460-1configure#validate policy-list Avaya C460 CLI Commands 232 Avaya C460 Reference Guide Layer 2 CLI Commands Layer 2 CLI Commands Timezone 221 show access lists Terminal width 225 tree Username Layer 3 CLI Commands Layer 3 CLI Commands Avaya C460 Reference Guide 239 Layer 3 CLI Commands 240 Avaya C460 Reference Guide Alarm Address ResolutionAgent Network Agent Backbone Broadcasting BeaconingBridge Burst Client Chassis ViewCollision Data Link Layer Domain Duplex ModeDot1Q End System Fragment Flow ControlFrame Full Duplex FDX Hub HostIeee In-Band Internet Interswitch Link ISLIP Address Jabber MAC Address Link-State ProtocolsMAC Layer MAC List Multicasting ModuleNetmask Network Packet Out-of-BandPlus Tagging Port Protocol Stack ProtocolQoS Query Routing Table RouterSegmentation Side-Band Spanning Tree Protocol Socket Switch Standalone ModeSwitch Monitoring Stack Trap TransceiverTree View Unicast Glossary 256 Avaya C460 Reference Guide

Avaya manual C460-1 show ip access-lists, Show ip access-list-summary, Show ip arp

Models: C460

Chapter 2 Avaya C460 CLI Commands

C460-1>show ip access-lists

show ip access-list-summary

User level: user, privileged, supervisor

C460-1>show ip access-list-summary

show ip arp