Mitsubishi Electronics XD8100LU Ample Features for Increased Expressiveness and Operation Ease

For Auditorium

For board room, conference hall

For Digital Signage

Ample Features for Increased Expressiveness and Operation Ease

Ultra Quiet 28dB Operation

Fan noise during projector operation can be distracting during a presentation or videoconference. XD8100U Series projectors operate at a significantly low noise level of only 28dB (i.e., using a single lamp in “low lamp” mode). As a result, presentations and conferences can be held without distracting projector noise in the background.

Examples of Noise Levels

20dB : Rustling leaves, the ticking of a wall clock (from 1m in front)

28dB

30dB : A whisper, a suburban area very late at night

40dB : A quiet neighborhood, small birds chirping

Geometric Corrections

■Keystone Correction

Trapezoidal distortion caused when the projector is not posi- tioned directly in front of the screen is corrected in both vertical and horizontal directions.

■Cornerstone Correction

Pixel conversion is used to correct trapezoidal and diagonal distortion that causes oblique images, ensuring the proper aspect ratio.

screen

■Curved-surface Projection Correction

Projectors in the series are equipped with a distortion cor- rection function that can be used when projecting images onto curved surfaces. Coordinates at the image’s four cor- ners are adjusted, enabling the projection angle to be adjusted at the time of angled or stacked pro-

jection. It is extremely handy for unique applications like projecting images onto special surfaces such as pillars at event sites.

Multi-screen Solutions

■Edge Blending

Edge blending creates a seamless image by adjusting the brightness at adjoining edges when using multiple projec- tors side-by-side to reproduce single widescreen images. This feature can also be utilized for top-bottom projection or a combination of side-by-side and top-bottom images; for example, when images are projected from four projectors in a two-by-two arrangement.

Edge blending function		Image overlap apparent
	With		Without
	edge blending		edge blending
Multiple projectors side-by-side			Multiple projectors top-bottom

■Color Matching

The use of multiple projectors to create a larger image can result in color variations due to slight differences in projector image processing. XD8100U Series projectors are equipped with a color matching function that resolves this problem. Each projector is adjusted so that the same colors are repro- duced when multiple projectors are used simultaneously.

Color matching function

Interchangeable Color Wheels Optional

Projectors come equipped with a color wheel that accentu- ates brightness, and an optional color wheel for accentuat- ing color is available. A sensor-based detection function is embedded in each unit to detect when a color wheel is re- placed, at which time the color wheel index is automatically adjusted. This interchangeability enables a more appropriate expression of the images being reproduced.

✽Excluding XD8000U

360° Projection Capability

Images can be projected over a full 360° range along the vertical axis* in- cluding reproduction on the ceiling or floor. The application possibilities are limitless.

*Excluding use in high-altitude mode.

Network Connectivity

Projectors are equipped with a RJ-45 LAN terminal for remote operation. Additionally, when used with Crestron RoomViewTM, integrated control of up to 250 projectors in- cluding power on/off control, message display and confir- mation of lamp service hours is possible. XD8100U Series are equipped with AMX Device

Discovery for simplified device management and compatible with PJLinkTM.

The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the United States, and other countries and areas.

Multiple Terminals

Many different interfaces are possible thanks to a variety of terminals including 3G-SDI (UD8400U only), DVI-D (HDCP), HDMI and 5BNC. A control terminal (compatible with RS- 232C) is also provided for easier system integration.

(UD8400U)

ID-compatible Remote Control

ID settings for up to 63 projectors are possible. Setting the IDs allows control of each individual projector when mul- tiple projectors are installed.

Power Zoom/Focus and Lens Shift

The zoom/focus and lens shift adjustment are powered by an electric motor, ensuring easy operation.

Stand-by Wattage under 0.3W*

Stand-by (low) mode power consumption is less than 0.3W, offering increased energy savings and further contributing to environmental preservation.

*When in stand-by (low) mode. At this time, use of the LAN function, serial output and Remote 1 is not possible.

Mechanical Shutter

An internal shutter in the projector enables light to be com- pletely blocked when the projector is in Mute mode.

✽Excluding XD8000U

Lamp Side Access

The lamps can be accessed from the side of the unit.

●OSD menu multilanguage compatibility (19 languages*)

●2-Screen mode

(PinP: XD8100U Split: WD8200U(

XD8000U UD8400U

●Direct power off

●Test pattern

●High-altitude mode (2,000 to 2,700m)

●Closed caption support

*Previous languages: Chinese, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Swedish

Languages added: Dutch, Indonesian, Malaysian, Norwegian, Thai, Turkish, Vietnamese

3 4