Configuring the FVS338

To configure the FVS338 VPN Wizard:

1.Select VPN from the main menu and VPN Wizard from the submenu. The VPN Wizard screen will display.

2.Check the Gateway radio box for the type of VPN tunnel connection.

3.Give the new connection a name, such as to_fvx..

Figure 5-14

4.Enter a value for the pre-shared key.

5.Enter the WAN IP address of the remote FVX538.

6.Enter the WAN IP address of the FVS338.

7.Enter the LAN IP address and subnet mask of the remote FVX538.

Virtual Private Networking

5-19

v1.0, August 2006

NETGEAR FVX538NA manual Configuring the FVS338