Enterasys Networks Network Card manual Ospf Configuration window appears as shown in Figure

Routing	Chapter 3
	Configuring an ANG-3000/7000

Table 4 Fixed OSPF Parameters

Parameter	Meaning	Fixed Value
AS Export	Specifies how many autonomoussystemsare	100
Limit	generated and exported each time.
Interface	Determines the ANG’s priority for becoming	0(theANGcannot
Priority	the designated router in the area.	be the designated
		router)

To configure OSPF properties for the ANG, perform the following steps.

1Perform the steps in “Setting Routing Protocol Parameters” on page 55 to access OSPF properties.

The OSPF Configuration window appears as shown in Figure 33.

Figure 33 OSPF Routing Protocol Configuration

2Type the area ID shared by the ANG and routers within the subnet in the OSPF Area ID fields.

3Type the IP address for the Trusted interface in the OSPF Router ID fields.

58 RiverMaster Administrator’s Guide