Enterasys Networks Network Card manual Click the NAT tab, NAT Server Address

Chapter 3	General Aurorean Network Gateway Settings
Configuring an ANG-3000/7000

10In the Primary WINS and Secondary WINS fields, enter the IP addresses of WINS servers on your network.

If your remote clients use standard Microsoft Dial-Up Networking (DUN) on the corporate network, you must complete these fields to enable browsing and communication with other devices in the Network Neighborhood.

11Click the NAT tab.

The tab page for the Network Address Translation (NAT) server address appears as shown in Figure 21.

Click here to open the Configuration pullout

Figure 21 NAT Server Address

12In the NAT field, enter the IP Address of the NAT server on your network.

The IP address you enter here is the address that Aurorean users will receive in the installation kit as their destination address - the alias external IP address of the ANG.

RiverMaster Administrator’s Guide 41