Enterasys Networks Network Card manual Tunnel Values section, enter a User Name, 244

Creating Remote Connections	Appendix B
	ANG-3000/7000 Preconfiguration Stored on a Floppy Disk

Figure 140 Remote Connection Parameters Window

2Enter a name which describes the destination ANG of this ANG.

Choosing a Remote ANG name that matches the name of the terminating ANG of this tunnel connection will make it easier to view system activity and statistics later. Refer to Figure 138 for a graphical view of this configuration.

3Choose an ANG from the drop down list in the Connection to Gateway field.

If you have configured other ANGs, they will appear in this list.

4In the Tunnel Values section, enter a User Name.

Designating a User Name which matches the name of this ANG will make it easier to view system activity and statistics later. Only one user name is required for site-to-site users to access the connection.

244 RiverMaster Administrator’s Guide