Enterasys Networks Network Card manual Configuring an ANG-3000/7000

Table of Contents

Chapter 3 – Configuring an ANG-3000/7000
Before You Begin	26
Allocating IP/IPX Addresses to Remote Clients	27
Virtual Subnets for Site-to-Site and Remote Access Tunnel Servers	30
Intelligent Client Routing	31
NAT Server	33
Site-to-Site Tunnels	34
AutoLink Recovery	35
General Aurorean Network Gateway Settings	37
Viewing Aurorean Alternate Address Information	42
Tunnel Protocols	43
Virtual Subnetting	50
IP Subnetting	50
IPX Virtual Networks	52
Routing	54
Setting Routing Protocol Parameters	55
Setting RIP Properties	55
Setting OSPF Properties	57
Routing Interfaces	59
Adding or Removing a Routing Protocol for an Interface	60
Configuring RIP for the Interface	62
Configuring OSPF on an Interface	64
Creating Static Routes	65
Adding a Remote Server	68
Changing Server and Tunnel Properties	71

iv RiverMaster Administrator’s Guide