Enterasys Networks Network Card manual Radius Authorization

Chapter 4 Adding an Authorization Plug-In

Setting Up Aurorean Services

6Optionally, specify a value in the Num Threads field.

This function allows the specified number of users to simultaneously log in without delay. The range of threads that can be set is 1 to 100, with a default value set to 10.

7If you want to make this plug-in the default authorization method, check the Default Plug-In box.

8Do one of the following:

–Click Update to save your changes.

–Click Cancel to clear the fields without saving the plug-in.

RADIUS Authorization

To configure the APS to forward authentication requests to a RADIUS server, perform the following steps:

1 Open the Configuration pullout.

2Choose Authorization Plug-ins from the Configure pull-down box in the top left corner of the pullout. Or, in the list of Aurorean Virtual Network devices, expand the tree list under the name of your APS (by clicking the + symbol), expand it again under Auth Service and click Make New Plug-in...

The Create New Plug-in window will appear as shown in Figure 46, but without default or configured values.

RiverMaster Administrator’s Guide 83