Enterasys Networks Network Card manual General Aurorean Network Gateway Settings

Chapter 3	General Aurorean Network Gateway Settings
Configuring an ANG-3000/7000

General Aurorean Network Gateway Settings

General network settings for the ANG include:

HThe current and possible future IP addresses for the server.

HEnabling Aurorean Virtual Network’s Intelligent Client Routing feature which provides you with a measure of control over a Aurorean Client’s access to the Internet.

HAddresses for the Domain Name System (DNS), Windows Internet Name Service (WINS), and Network Address Translation (NAT) servers used by remote clients for name resolution.

To set general network settings for the ANG, perform the following steps:

1 Open the Configuration pullout.

2In the list of Aurorean devices, expand the tree list under Servers (click the + symbol).

3 Expand the tree list under the name of your ANG.

4Click on General to display the general network settings tab pages.

A sample General settings window appears as shown in Figure 18. The IP Address field is read-only and displays an address assigned to the ANG during installation. If the ANG is equipped with a single Ethernet interface, this field shows the address of the Trusted port. If the ANG is equipped with dual Ethernet interfaces, this field shows the address of the External port.

RiverMaster Administrator’s Guide 37