Enterasys Networks Network Card manual Click Add Remote Server

Chapter 3 Adding a Remote Server

Configuring an ANG-3000/7000

4Click Add Remote Server.

The Add Remote Server window appears as shown in Figure 40.

Type the name of the Remote Server here

Click here to add the server

Click either the IP Address or FQDN button and enter a value in the adjacent field

Figure 40 Add Remote Server Window

5Choose a name for the server in the Remote Server Name window.

6Click either IP Address or FQDN (Fully Qualified Domain Name). If you choose IP Address, enter an IP address in the fields provided. If you choose FQDN, enter a value in the single field.

The FQDN is the name of the Remote Server as well as its domain. For example: server1.argus.com

7Type a User Name and User Password and confirm the password in the fields provided.

This User Name and Password must later be registered in the authentication database of the Remote (terminating) ANG by adding the user to a group (Refer to Chapter 6 for more information).

RiverMaster Administrator’s Guide 69