Enterasys Networks Network Card manual Do one of the following, Select APS Window

Installing the Application	Chapter 1
	Installing RiverMaster Software

3Do one of the following:

–If you are configuring only one Aurorean Policy Server, enter the IP address assigned to it in the Primary fields and click OK. The RiverMaster Login window will appear as shown in Figure 3 with the Aurorean VN Name, APS name and IP address displayed as you specified earlier. Skip to Step 5.

–If, in addition to configuring a Primary APS, you have installed a backup APS to use with the Auto Link Recovery feature, supply this IP address in the Alternate fields after entering an IP address of the Primary APS in the fields provided. Click OK. The Select APS window will appear as shown in Figure 2.

This IP address is set using the Aurorean configuration wizard program; refer to the instructions supplied with this program for more information. RiverMaster needs this IP address to locate and synchronize with the Aurorean Policy Server.

4If you entered both APS IP addresses, select the APS you want to log into and click OK.

The RiverMaster Login window appears as shown in Figure 3 with the Aurorean VPN name displayed as typed in the Identify your Aurorean Environment window.

Figure 2 Select APS Window

6 RiverMaster Administrator’s Guide