Enterasys Networks Network Card manual Adding Remote Gateways, 218

Adding Remote Gateways	Appendix B
	ANG-3000/7000 Preconfiguration Stored on a Floppy Disk

Adding Remote Gateways

This section describes how to add a Remote ANG including its Name, IP Address, User Name and Password and tunnel Protocol.

To add a Remote ANG, perform the following steps:

1 Open the Configuration pullout.

2In the list of Aurorean devices, expand the tree list under Systems (click the + symbol) and again under Remote Gateways as shown in Figure 120.

Figure 120 Add Remote Gateway

3Click Add Remote Gateway.

The Add Remote ANG window appears as shown in Figure 121.

218 RiverMaster Administrator’s Guide