Enterasys Networks Network Card manual Adding an Authorization Plug-In, Trace Messages Display

Adding an Authorization Plug-In	Chapter 4
	Setting Up Aurorean Services

For example, a low trace level set for the Tunnel Management Service will produce messages similar to those in Figure 43.

Note Tunnel Trace messages sent by the tunnel server

Highlighted message here is detailed in description area below

See message text here

Click here for View System Activity pullout

Figure 43 Trace Messages Display

If you read the text for each Tunnel Trace message above, you can follow the chain of protocol messages which signify the communications that occur on a packet level when a client successfully makes a connection. Then, if a client connection subsequently fails, you could compare messages and troubleshoot the problem. For instructions on setting trace levels, refer to “Setting Trace Levels” on page 97.

Adding an Authorization Plug-In

The Enterasys Authentication plug-in is factory-installed by Enterasys Networks and made the default plug-in. This plug-in is used when you log into the RiverMaster application to ensure that you have administration privileges. To support SecurID and RADIUS authentication, you must add one or more SecurID or RADIUS plug-ins.

80 RiverMaster Administrator’s Guide